|
|
|
Cal Dry 100™
Cal Dry 1500™
Cal Dry 100™
Cal Dry 100™ is the most cost-effective product for the protection of
moisture and ESD sensitive components. Cal Dry 100™ replaces costly
nylon/foil laminates with a 36 mil multi-layer composition. Featuring a
low MVTR, it is also available to meet Mil-B-81705C Ty. I CL. I.
Utilizing multiple layers of aluminized polyester, Cal Dry 100™ achieves
the task of being a highly effective but economical solution to static
free moisture barrier packaging
Meets the MVTR, EMI/RFI/Static shielding requirements of Mil-B-81705L,
Ty. I and EIA 583. Cal Dry 100™ provides full protection from static
fields and tribocharging.
Features:
-
Good Moisture Barrier
-
Light weight and puncture resistance: Easily conforms to the shape of
products during vacuum packaging.
-
For packaging of SMD's in trays, tape and reel, chip rails, and disk
caddies.
-
Static dissipative inner layer and outer surfaces.
-
Available in class 100 clean.
-
Meets the electrical and physical requirements of Mil-B-81705C Ty. I and
EIA 514 and EIA 583.
-
Date and lot coded for traceablitiy.
-
Contains no amines or amides and is N-Octanoic acid free.
-
Custom 6-color printing and hot stamping are available.
|
|
SPECIFICATIONS -
Typical Values |
|
Electrical Properties: |
|
|
|
EMI Shielding (MIL-B-81705-Rev-C): |
|
> 40 db Between 1 & 10 GHz |
|
Resistivity-Conductive Metal Layer (ASTM
D-257): |
|
< 2 Ohms/sq. in. avg. |
|
Surface Resistivity (both surfaces) (ASTM
D-257 @ 12% RH): |
|
< 1012 Ohms. sq. in. |
|
Static Decay (FTMS 101C, Method 4046.1 5000
to 0 Volts): |
|
< 0.05 Seconds |
|
Capacitive Probe Test (High Voltage
Discharge)-(EIA-std 541/Appendix E-1 KV): |
|
< 8 Volts |
|
Charge Generation-nominal (Modified incline
plane Avg. nC/sq. in.): |
|
|
|
Teflon: |
|
-0.09 |
|
Quartz: |
|
+0.10 |
|
|
|
Physical Properties: |
|
|
|
Yield: |
|
7100 sq. in./lb. |
|
Total Thickness: |
|
3.6 mils (92 microns) |
|
Light Transmission (ASTM D-1003-77): |
|
< .01% |
|
Tensile Strength (ASTM D882-83 Method A): |
|
MD: 9000 psi
TD: 10,500 psi |
|
Burst Strength (FTMS 191-C Method 5122): |
|
84 psi |
|
Puncture Strength (FTMS 101-C Method 2065.1): |
|
> 20 lbs |
|
Elongation (ASTM D822-83 Method A): |
|
MD: 98%
TD: 80% |
|
Heat Seal Strength (ASTM D-1876-72 Impulse
Sealer): |
|
> 11 lbs./in width |
|
Seam Strength before & after aging: |
|
160 F = NO SEPARATION
100 F = NO SEPARATION
Room Temperature = NO SEPARATION |
|
MVTR (ASTM F-1249 @ 100°F 100 sq. in./24
hrs): |
|
< .02 gms, .01 gms nominal |
|
Water Resistance (FTMS 101-C, Method 3028,
Procedure F): |
|
No Delamination |
|
Delamination (FTMS 101-C, Method 3015): |
|
No leakage, swelling, embrittlement |
|
Resistance to aging: |
|
No Delamination |
|
|
|
Contact Corrositivity: |
|
|
|
Low Carbon Steel, Aluminum, Copper, Ag plated
copper foil, Sn-Pb coated copper foil, No Evidence of Corrosion or
Etching of Metal |
|
|
|
Cal Dry 1500™
Cal Dry 1500™ is the ultimate dry packaging bag
on the market. It is specifically designed for the vacuum packaging of
moisture and ESD sensitive components. This 7 mil thick composite
material provides an extremely low MVTR and high puncture resistance.
Cal Dry 1500™ features an incredible 38-pounds puncture resistance,
which not only provides superior drop test performance, but also is the
best choice for vacuum packaging of trays, reels and tubes with sharp
edges.
Because Cal Dry 1500™ utilizes the most current metalizing technology,
its moisture barrier performance exceeds foil laminates for low Moisture
Vapor Transmission Rate (MVTR), particularly after flexing.
The multiple layer construction of Cal Dry 1500™ provides full
protection against ESD, EMI/RFI and tribocharging. |
|
SPECIFICATIONS -
Typical Values |
|
Electrical Properties: |
|
|
|
EMI Shielding (MIL-B-81705-Rev-C): |
|
> 40 db Between 1 & 10 GHz |
|
Resistivity-Conductive Metal Layer (ASTM
D-257): |
|
< 2 Ohms/sq. in. avg. |
|
Surface Resistivity (both surfaces) (ASTM
D-257 @ 12% RH): |
|
< 1012 Ohms. sq. in. |
|
Static Decay (FTMS 101C, Method 4046.1 5000
to 0 Volts): |
|
< 0.05 Seconds |
|
Capacitive Probe Test (High Voltage
Discharge)-(EIA-std 541/Appendix E-1 KV): |
|
< 8 Volts |
|
Charge Generation-nominal (Modified incline
plane Avg. nC/sq. in.): |
|
|
|
Teflon: |
|
-0.09 |
|
Quartz: |
|
+0.10 |
|
|
|
Physical Properties: |
|
|
|
Total Thickness: |
|
7.0 mils |
|
Light Transmission (ASTM D-1003-77): |
|
< .01% |
|
Tensile Strength (ASTM D882-83 Method A): |
|
735 lbs. |
|
Tear Strength (D1004-66 - Notched) MD: |
|
MD: 5.8 lbs.
TD: 7.5lbs. |
|
Burst Strength (FTMS 101-C Method 2007 1a): |
|
> 130 psi |
|
Puncture Strength (FTMS 101-C Method 2065.1): |
|
> 38 lbs. |
|
Elongation (ASTM D822-83 Method A): |
|
MD: 40%
TD: 74% |
|
Heat Seal Strength (ASTM D-1876-72 Vertrod
Sealer): |
|
> 11 lbs./in width |
|
MVTR (ASTM F-1249 @ 100°F 100 sq. in./24
hrs): |
|
< .0006 gms |
|
OTR (@ 100% Oxygen 100 sq. in./24hrs.) ASTM
D-3985 77°F @ 90% RH: |
|
< 0.0005 cc |
|
|
|
Contact Corrositivity: |
|
|
|
Low Carbon Steel, Aluminum, Copper, Ag plated
copper foil, Sn-Pb coated copper foil, No Evidence of Corrosion or
Etching of Metal |
|
|
