Description
10″ x 12″ Dri-Shield Bags D2000
SCC 2000 is the most cost-effective product for the protection of moisture and ESD sensitive components. SCC 2000 replaces costly nylon/foil laminates with a 3.6 mil multi-layer composition. Featuring a low MVTR, it is also available to meet Mil-B-81705C Ty. I CL. I. Utilizing multiple layers of aluminized polyester, SCC 2000 achieves the task of being a highly effective but economical solution to static free moisture barrier packaging Meets the MVTR, EMI/RFI/Static shielding requirements of Mil-B-81705L, Ty. I and EIA 583. SCC 2000 provides full protection from static fields and tribocharging. Features: * Good Moisture Barrier * Light weight and puncture resistance: Easily conforms to the shape of products during vacuum packaging * For packaging of SMD’s in trays, tape and reel, chip rails, and disk caddies. * Static dissipative inner layer and outer surfaces. * Available in class 100 clean. * Meets the electrical and physical requirements of Mil-B-81705C Ty. I and EIA 514 and EIA 583. * Date and lot coded for traceablitiy. * Contains no amines or amides and is N-Octanoic acid free. * Custom 6-color printing and hot stamping are available.
| Electrical Properties: | |
| EMI Shielding: (MIL-B-81705-Rev-C) | > 40 db Between 1 & 10 GHz |
| Resistivity-Conductive Metal Layer (ASTM D-257): | < 2 Ohms/sq. in. avg. |
| Surface Resistivity (both surfaces) (ASTM D-257 @ 12% RH): | < 1012 Ohms. sq. in. |
| Static Decay (FTMS 101C, Method 4046.1 5000 to 0 Volts): | < 0.05 Seconds |
| Capacitive Probe Test (High Voltage Discharge)-(EIA-std 541/Appendix E-1 KV): | < 8 Volts |
| Charge Generation-nominal (Modified incline plane Avg. nC/sq. in.): | |
| Teflon: Quartz: |
-0.09 +0.10 |
| Physical Properties: | |
| Yield: | 7100 sq. in./lb. |
| Total Thickness | 3.6 mils (92 microns) |
| Light Transmission (ASTM D-1003-77): | < .01% |
| Tensile Strength (ASTM D882-83 Method A) | MD: 9000 psi TD: 10,500 psi |
| Burst Strength (FTMS 191-C Method 5122) | 84 psi |
| Puncture Strength (FTMS 101-C Method 2065.1) | > 20 lbs |
| Elongation (ASTM D822-83 Method A) | MD: 98% TD: 80% |
| Heat Seal Strength (ASTM D-1876-72 Impulse Sealer): | > 11 lbs./in width |
| Seam Strength before & after aging: | 160 F = NO SEPARATION 100 F = NO SEPARATION Room Temperature = NO SEPARATION |
| MVTR (ASTM F-1249 @ 100°F 100 sq. in./24 hrs) | < .02 gms, .01 gms nominal |
| Water Resistance (FTMS 101-C, Method 3028, Procedure F): | No Delamination |
| Delamination (FTMS 101-C, Method 3015): | No leakage, swelling, embrittlement |
| Resistance to aging: | No Delamination |
| Contact Corrositivity: | |
| Low Carbon Steel, Aluminum, Copper, Ag plated copper foil, Sn-Pb coated copper foil, No Evidence of Corrosion or Etching of Metal | |
